Notice TFA Symphony.qxd
ELECTRONIC BATHROOM SCALE - BODY FAT ANALYZER
3. Press [ ▲ / ▼ ] button to adjust the activity level
(1 to 5, 1 being a very low physical activity level,
5 being a highly active physical activity level in the
day). Then press [
age figure.
4. Press [ ▲ / ▼ ] button to increase or decrease the
age.
5. Press [
] button to confirm age. The gender
icon will start to blink.
6. Press [ ▲ / ▼ ] button to toggle between Male
[
] and Female [
7. Press [
] button to confirm the gender. The
arrow next to the athlete/normal mode will begin
to flash.
8. Press [ ▲ / ▼ ] button to toggle between athlete (A)
and normal (N) icons.
N.B.: The Athlete Mode selection is only available to those
aged 18 or older. For those aged 17 or under, this step is
automatically by-passed.
9. Presse [
] button to confirm all settings with
1 long beep. «
R » icon will be displayed on the
R
display.
As soon as you hear the loud beep, step on the
scale with bare feet.
10. Step on the scale with bare dry feet. Stand still
while the unit measures your weight. The
weight will be displayed for 2 seconds.
11. Then it will start to measure your body water and
body fat percentages. The following measurement
pattern will be shown on the display during the
measurement process.
12. The measurement process finishes with 1 long
beep.
28/01/08
11:34
] to confirm and edit the
] icons.
Page 19
• Body fat % is shown on the left of the LCD and
the current weight is shown on the right for 4
seconds.
• Then Total Body water % is shown on the left of
the LCD and the current weight is still shown on
right, during 4 seconds.
• After 4 seconds, the Bone Mass is shown on the
left of the LCD and the Muscle Mass appears on
the right of LCD.
• Then the Daily Calorie Reference is shown on the
left of LCD and the current weight still appears on
the right of the LCD. The PC (Present Calorie) icon
appears instead of the age.
NB: The Daily Calorie Reference corresponds to the
amount of calories necessary per day to maintain your cur-
rent weight.
• After 4 seconds, the Optimal Calorie Reference is
shown on the left of the LCD and the Optimal
Weight is shown on the right of the LCD. The IC
(Optimal Calorie) icon appears.
NB: The Optimal Calorie Reference corresponds to the
amount of calories required per day to reach your optimal
weight. Your optimal weight is calculated through a speci-
fic formula, taking into accounts your personal parameters
• After 4 seconds, the unit will turn off automatically.
.
19