ALFRA KFH 250 Mode D'emploi page 17

Carbide Deburring End Mill

Solid Carbide End Mill Precision, Premium quality

Shank-Ø 12 mm

Total length 80 mm
Carbide End Mill Ø 12 mm, 3 cutting edges
For long-chipping materials aluminum/copper/plastic
Bevel Width up to 14 mm
High gloss polished
Carbide End Mill Ø 12 mm, 4 cutting edges
for steel, cast iron, stainless steel
Bevel Width up to 8 mm max.
Coated
Carbide End Mill Ø 12 mm, 4 cutting edges
Rough toothing
for steel/ cast iron / not for stainless steel !
For welding preparation.
Bevel Width up to 14 mm (with increasing milling depth)
Coated
Solid Carbide Radius End Mill*, 5 cutting edges,
L = 89 mm
 Solid Carbide Radius End Mill
 For the chamfering of work piece edges
 Versatile use. When processing hard
material, radii should be beveled in
separate work steps with increasing milling depth.
 The middle adjustment of the radius outline towards the
edge of the work piece is effected by the axial adjustment
of the motor in the clamping eye.
*Delivery time upon request.
Solid Carbide End Mills and Radius End Mills 1.5 – 2.0 – 2.5 upon request
Description End Mill Prod.-No.
r 3.0 = 25165
r 4.0 = 25166
r 5.0 = 25167
(r = radius)
25160
25161
25163
17