Models; Mechanical Characteristics; Tamper Monitoring; Protections - SLAT AXS3 Notice D'utilisation

9.3.3 Efficiency
@ 20% load
@ 75% load
@ 100% load

9.4 Models

C24
*Photos not
contractual

9.5 Mechanical characteristics

Modèle
C24
C38
C85
* See mechanical drawing in annex

9.6 Tamper monitoring:

Any housing tamper must be detected.
Any snatch pulling the housing more than 5mm away from the wall must be detected
Both detections are reported via a dry contact.

9.7 Protections

Against battery polarity inversion before and after switch on.
Against secondary overvoltages thanks to transil diode (regulation troubles or connections mistakes) and auto-recovery
when output voltage > 2.4V/elt
Against battery wiring error
If battery voltage > 2.5V/elt +/-3%, the battery is not connected
o
If battery voltage < 1.17V/elt +/-3%, the battery is not connected
o
Against secondary overcurrent and short-circuits.
Against internal short-circuits thanks to primary fuse.
Against primary overvoltages (due to atmospheric or industrial causes).

9.8 Battery low voltage disconnection

Battery get disconnect when is voltage reach the threshold of 1.7V/cells +/-3%.
The disconnection is made by a static switch located on positive battery output.
12V
4A
84,5 %
88,3 %
88,6 %
Modèle 12V
C24 12V 4A C24
C38 12V4A C38
C85
Modèle 24V
C24 24V 2A C24
C38 24V 2A C38
C85
Longueur Hauteur
322mm 248mm
350mm 289mm
408mm 408mm
6A 2A
84,5 % 81,3 %
88,3 % 89,1 %
87,8 % 90,1 %
4A 6A
12V 6A C24
12V 6A C38
- 12V 6A C85
2A 3A
24V 3A C24
24V 3A C38
- 24V 3A C85
Profondeur
126mm
189mm
224mm
19
24V
3A
84,6 %
90,4 %
90,9 %
C38 – C85
*Photos not
contractual
Poids IP
2.5kg 30
5.8kg 31
9.2kg 31