Snapper XD ESXDBL82 Manuel D'utilisation page 10

EN
AR BG CS DA DE ES ET FI FR HR HU IT LT LV NL NO PL PT RO RU SK SL SR SV TR UK
as gutters, screens, patios, grills, porches,
and gardens.
„ Watch out for children, pets, open
windows, or freshly washed cars, and
blow debris safely away.
„ After using blowers or other equipment,
clean up. Dispose of debris properly.
MAINTENANCE
In order to avoid personal injury and the
risk of fire and electric shock, remove the
battery pack before adjusting, inspecting,
or cleaning the blower.
CLEANING
Remove the battery pack.
„ Brush or blow dust and debris out of
the air vents using compressed air or
a vacuum. Keep the air vents free of
obstructions, sawdust, and wood chips.
Do not spray, wash, or immerse the air
vents in water.
„ Wipe off the housing and the plastic
components using a moist, soft cloth. Do
not use strong solvents or detergents on
the plastic housing or plastic components.
Certain household cleaners may cause
damage, and may cause a shock hazard.
BATTERY PACK
„ Store the battery pack charged.
„ Once the charging light turns green,
remove the battery from the charger and
disconnect the charger from the outlet.
„ Recharge the battery pack anytime you
have notice there is less power. Never
let the battery pack become completely
discharged.
„ After charging, the battery pack may
be stored in the charger as long as the
charger is not plugged in.
English (original instructions)
WARNING
CHARGER MAINTENANCE
„ Keep the charger clean and clear of
debris. Do not allow foreign material to
get into the recessed cavity or onto the
contacts. Wipe the charger clean with a
dry cloth. Do not use solvents or water,
and do not place the charger in wet
conditions.
„ Unplug the charger when there is no
battery pack in it.
„ Fully charge the batteries before placing
them in storage.
„ Store the charger at normal room
temperature. Do not store it in excessive
heat. Do not use the charger in direct
sunlight. Recharge at room temperature
between 42.8˚F and 104˚F (6˚C and
40˚C). If the battery pack is hot, allow it
to cool down inside of the charger. The
battery will begin charging once it has
returned to room temperature.
When servicing use only identical replace-
ment parts. Use of any other parts may
create a hazard or cause product damage.
Avoid using solvents when cleaning plas-
tic parts. Most plastics are susceptible to
damage from various types of commercial
solvents and may be damaged by their use.
Use clean cloths to remove dirt, dust, oil,
grease, etc.
Do not at any time let brake fluids, gaso-
line, petroleum based products, penetrat-
ing oils, etc. come in contact with plastic
parts. They contain chemicals that can
damage, weaken or destroy plastic.
To avoid serious personal injury, always re-
move the battery pack from the tool when
cleaning or performing any maintenance.
7
WARNING
WARNING
WARNING