Checklist - SICK LSI 101 Mode D'emploi

LSI
9. This test replaces the test specified in the PLS Technical
Description / Operating Instructions.
Note for the operator
The instructions concerning daily checking are also
provided in the form of a self-adhesive label. Please affix
the label in an easily readable location near the safety
device in order to facilitate the daily checking procedure.

6.2 Checklist

Checklist for machine manufacturer/installer for the
installation of Electro Sensitive Protective Equipment
(ESPE)
.
Dependent upon the application, the below listed checks are a
minimum when placing an ESPE in operation for the first
time.
For reference purposes the list should be retained or stored
with the machine documents.
8 008 308/M848/06-05-02 Operating Instructions · LSI
© SICK AG · Industrial Safety Systems · Germany · All rights reserved
GB
145