Hilti HY-150 MAX Mode D'emploi page 2

Centre Scientifique et
Technique du Bâtiment
84 avenue Jean Jaurès
CHAMPS-SUR-MARNE
F-77447 Marne-la-Vallée Cedex 2
Tél. : (33) 01 64 68 82 82
Fax : (33) 01 60 05 70 37
European Technical
Assessment
English translation prepared by CSTB - Original version in French language
General Part
Nom commercial :
Trade name :
Famille de produit :
Product family :
Titulaire :
Manufacturer :
Usine de fabrication:
Manufacturing plants :
Cette evaluation contient:
This Assessment contains :
Base de l'ETE :
Basis of ETA :
Cette évaluation remplace:
This Assessment replaces :
Translations of this European Technical Assessment in other languages shall fully correspond to the original issued document and should be identified as
such. Communication of this European Technical Assessment, including transmission by electronic means, shall be in full. However, partial reproduction may
be made, with the written consent of the issuing Technical Assessment Body. Any partial reproduction has to be identified as such..
Injection system Hilti HIT-HY 150 MAX for rebar connection
Scellement d'armatures rapportées, diamètres 8 à 25mm, avec
Système d'injection Hilti HIT-HY 150 MAX.
Post installed rebar connections diameter 8 to 25 mm made
with Hilti HIT-HY 150 MAX injection mortar.
Hilti Corporation
Feldkircherstrasse 100
FL-9494 Schaan
Principality of Liechtenstein
Hilti plants
25 pages incluant 22 annexes qui font partie intégrante de
cette évaluation
25 pages including 22 annexes which form an integral part of
this assessment
DEE 330087-00-0601, Edition juillet 2015
EAD 330087-00-0601, Version July 2015
ETE-08/0202 du 25/06/2013
ETA-08/0202 dated 25/06/2013
ETA-08/020 2
du 25/06/2018
Member of
www.eota.eu