Publicité
Les langues disponibles
Les langues disponibles
8611295
heat, flames and splashes of molten material. Artificial fabrics
may burn and melt, resulting in a more severe injury.
1.1 Wear welding capes and sleeves when performing
overhead welding.
2.
Do not wear clothes or protective gear that are frayed, oily
or greasy as they may ignite from the heat or ejected slag
and sparks.
3.
Wear thick clothes that do not expose the skin. Ultraviolet
or infrared light can burn skin with sufficient exposure.
4. Do not wear clothing that can hold hot debris or sparks such
as pant cuffs, shirt pockets or boots. Choose clothing that has
flaps over pockets or wear clothing to cover the openings
such as pant legs over the boots or an apron over the shirt.
5.
Gloves should contain an insulating lining to protect against
an electric shock.
6.
Rubber soled footwear or electrically insulated work boots
are recommended while working with a welding unit. The
non- skid sole is will also help maintain footing and balance
during work.
6.1 Select boots with steel toe protection to prevent injury
from falling objects.
RESPIRATORS
1.
Respiratory protection is needed when ventilation is not
sufficient to remove welding fumes or when there is risk of
oxygen deficiency.
1.1. Wear a NIOSH approved respirator when working on
materials that produce dust or particulate matter.
2.
Work in a confined space only if it is well ventilated or while
wearing an air-supplied respirator. Welding fumes and
gases can displace air and lower the oxygen level causing
injury or death. Be sure the breathing air is safe (See Fumes
and Gases).
6
ARC 170 DUAL VOLTAGE ARC/TIG WELDER
For technical questions call 1-800-665-8685
V1.0
Publicité
