Publicité
Les langues disponibles
Les langues disponibles
8611295
•
Offer less arc weld.
•
Have a wider arc.
•
Have a more consistent arc.
The included angle determines weld bead shape and size.
Generally, as the included angle increases, penetration
increases and bead width decreases.
Tungsten
Diameter
3/64 in. (1.2 mm)
1/16 in. (1.6 mm)
3/32 in. (2.4 mm)
1/8 in. (3.2 mm)
CARE & MAINTENANCE
1.
Maintain the tool with care. A tool in good condition is
efficient, easier to control and will have fewer problems.
2.
Inspect the tool fittings, alignment, hoses and power supply
cord periodically. Have damaged or worn components
repaired or replaced by an authorized technician. Only use
identical replacement parts when servicing.
3.
Exposure to extremely dusty, damp, or corrosive air is
damaging to the welding unit. In order to prevent possible
failure or fault of this welding equipment, clean the dust at
regular intervals with clean and dry compressed air.
4. Follow instructions for lubricating and changing accessories.
5.
Only use accessories intended for use with this tool.
6.
Keep the tool handles clean, dry and free from oil/grease at
all times.
38
ARC 170 DUAL VOLTAGE ARC/TIG WELDER
Tip
Diameter
0.25 mm
0.5 mm
0.8 mm
0.8 mm
1.1 mm
1.1 mm
1.5 mm
For technical questions call 1-800-665-8685
Constant
Current
Included
Range
Angle
Amps
20°
05 – 30A
25°
08 – 50A
30°
10 – 70A
35°
12 – 90A
45°
15 – 150A
60°
20 – 200A
90°
25 – 250A
V1.0
Current
Range Pulsed
Amps
05 – 60A
05 – 100A
10 – 140A
12 – 180A
15 – 250A
20 – 300A
25 – 350A
Publicité
