Publicité
Les langues disponibles
Les langues disponibles
8611295
2.
Do not start the tool when the electrode is touching the
workpiece.
3.
Hold the tool by the insulated gripping surfaces when
performing an operation where it may contact hidden
wiring or its own cord and cables. Contact with a 'live' wire
will electrify exposed metal parts and shock the operator.
4. Take work breaks to prevent the tool's motor from
overheating and/or overloading. Refer to the welding unit's
duty cycle in Specifications.
5.
Keep hands away from the electrode and the area it is
being applied to when the tool is in operation.
6.
Do not connect the welding unit ground clamp to an
electrical conduit. Do not weld on an electrical conduit.
7.
Do not touch the electrode or welded surface immediately
after use. The surface will be hot and may cause an injury.
8.
Never use a tool with a cracked or worn electrode. Change
the electrode before using and discard the damaged one.
9.
Remove the electrode from the holder when not in use.
POWER CORD
Insert the power cord plug directly to the power supply
whenever possible. Extension cords are not recommended for
use with this welding unit.
ELECTROMAGNETIC FIELDS
WARNING! Stop welding immediately and move away from
the welding unit if you feel faint, dizzy, nausea or shocks.
Seek medical attention.
Electromagnetic Fields (EMF) can interfere with electronic
devices such as pacemakers. Anyone with a pacemaker should
consult with their doctor before working with or near an arc
welding unit. The following steps can minimize the effects of
electromagnetic fields.
18
ARC 170 DUAL VOLTAGE ARC/TIG WELDER
For technical questions call 1-800-665-8685
V1.0
Publicité
