Publicité
Les langues disponibles
Les langues disponibles
8611295
NOTICE!
WORK AREA
1.
Operate in a safe work environment. Keep your work area
clean, well lit and free of distractions.
2.
Remove all unnecessary people from the work area when
welding. Anyone remaining in the work area must wear the
appropriate welding safety equipment.
3.
Store tools properly in a safe and dry location. Keep tools
out of the reach of children.
4. Do not install or use in the presence of flammable gases,
dust or liquids.
5.
Welding sparks and ejected molten slag can start a fire.
Remove combustible materials within 39 ft (12 metres) of
the welding unit. See Fire and Explosion Precautions.
6.
Have a fire extinguisher readily available (see Fire and
Explosion Precautions).
7.
Use protective screens or barriers to protect others from
flash and glare; warn others in the area to look away from
the arc.
8.
Keep the welding unit at least one foot from any wall or
structure.
9.
Check that the work area is free from fires, sparks or hot
debris before leaving.
PERSONAL SAFETY
WARNING! Wear personal protective equipment approved by
the Canadian Standards Association (CSA) or American
National Standards Institute (ANSI).
4
ARC 170 DUAL VOLTAGE ARC/TIG WELDER
This notice indicates that a specific hazard or
unsafe practice will result in equipment or
property damage, but not personal injury.
For technical questions call 1-800-665-8685
V1.0
Publicité
