Assembly - Brinly PCT-101BH Manuel Du Propriétaire

==================================================================================================
Assembly Step 1
Install Axle Support
Hardware Panel 1
1. Position the Axle Support (20)
over slotted holes over the cart
bed (1).
2. Secure in place from inside the
cart bed (1) with one 5/16 x 1" Round
Head Screw (7), and 5/16" Flat Washer (10).
From the outside, add one 5/16" Lock Washer (9)
and one 5/16" Hex Head Nut (8), as shown.
Add all eight screws as illustrated.
3. Do NOT tighten nuts fully (yet).
Assembly Step 2
Install Lock Bracket
Hardware Panel 2
1. Position the Lock Bracket (6)
over the bed, as shown.
2. Secure the bracket (6) from inside
the cart bed (1) with one 5/16 x 1"
Round Head Screw (7), and 5/16" Flat
washer (10).
From the outside, add a 5/16"
Lock Washer (9) and one 5/16"
Hex Nut (8). Add the second screw
similarly, as illustrated.
3. Do NOT tighten nuts (yet).
Please disregard the extra washers in Hardware Panel 2, they are for a different model.
English Manual

ASSEMBLY

7
8
9
10
7
x8
8
9
10
7
x2
1008577ALL-D