VINCENT CD-S8 Manuel D'utilisation page 38

Operation
Fast forward
Fast rewind
Operation
Program the
playback order
Vincent
38
OPERATING THE APPLIANCE
PLAYBACK FUNCTIONS
Button(s) Description
The track will be played at higher speed (fast forward) as long as you
(27) continue to hold down this button while the CD is playing. If the button is
released, playback will continue at normal speed. If the CD play is stop-
(FAST
FORWARD) ped, then this button has no function. This play function too can only be
used via the remote control.
The track will be played backwards at higher speed ("rewind") as long as
you continue to hold down this button while the CD is playing. If the but-
(29)
ton is released, play will continue at normal speed in a forward direction.
(FAST BACK)
If the CD playback is stopped, then this button has no function. This play
function too can only be used via the remote control.
OPERATING THE APPLIANCE
ADVANCED PLAYBACK FUNCTIONS
Button(s) Description
With this function it is possible to set up a desired playing sequence of the
CD tracks. This also allows you to play a smaller selection of your own choi-
ce from all the CD tracks. This programming can only be done with the remo-
te control. The "program" is set up by the following procedure:
• Press the PGM button
• Enter the numbers of all desired tracks one after the other on the
number pad of the remote control. For track 10 use the key "10". For
all other two-figure track numbers first press the "10+" button as
PGM (32)
many times as necessary until the number of 10's is correct. If the
second digit is a zero no additional keystroke is necessary. If the
Number keys
second digit is from the range 1..9 press the corresponding number
(22)
key (example: for track 23 press the "10+" button twice and the "3"
button once). To remove the last selected track number from the list,
CANCEL (31)
press "CANCEL".
• If you want to start playback of the program immediately, press
"PGM". If you just want to confirm the program but want to start
playback later, press "STOP" (14)(28).
The functions "REPEAT" (25) and "RANDOM" (11)(33) can also be applied
to the programmed track selection. You can see on the display (9) from the
text "PGM" that a program is active. It is only if you press "PGM", eject the
CD or switch off the CD player that your own playing sequence is deleted.