VINCENT CD-S8 Manuel D'utilisation page 37

Operation
Start and pause
playback
Insert/Change the CD
Direct selection
of a track
Stop playback
Skip to the
following track
Skip to playback
the previous track
OPERATING THE APPLIANCE
PLAYBACK FUNCTIONS
Button(s) Description
This key, both on the front of the device and on the remote control, starts
playing the inserted CD and the symbol " " appears on the display (9)
during playback. If there is no CD inserted, "NO DISC" appears in the
(12)(26) display and pressing the button has no effect. If the button is pressed
PLAY/ again while a CD is playing, play will be interrupted at the current positi-
PAUSE on. This "PAUSE" mode is indicated in the display by the symbol " ".
During the pause the disc continues to rotate and when the button is pres-
sed play continues from this position. The "PAUSE" function should only
be used for brief interruptions.
With this button you open and close the disc tray so that a CD can be
inserted or removed. This button is located both on the front of the device
(10)(30)
and on the remote control. If the text "OVER" appears in the display (9),
OPEN/
then the CD contains more than 16 tracks. Some of the tracks cannot then
CLOSE
be shown in the display's music menu.
You can start playing a track at any time by keying in the track number on
the remote control. For track 10 use the button "10". For all other two-digit
track numbers first press the "10+" button as many times as necessary until
Number keys the number of 10's is correct. If the second digit is a zero no additional key-
(22) stroke is necessary. If the second digit is from the range 1..9 press the corre-
sponding number key (example: for track 23 press the "10+" button twice
and the "3" button once). If there is no track of the keyed-in number on the
CD, the player switches to "STOP" mode.
While a CD is being played, pressing this button stops the playing. If the
player was in "PAUSE" mode, this mode will also be ended by pressing the
(14)(28)
"STOP" button. The total number of tracks on the CD and the total playing
STOP
time appear in the display (9) again. This button is on both the front of the
device and the remote control.
When this button is pressed while the CD is playing, the current track
stops playing and the next track in the sequence begins to play. If this but-
ton is pressed in "STOP" mode, you can choose all the CD tracks one
(15)(35)
after the other starting from track 01. Playback can then be started again
NEXT
with the "PLAY/PAUSE" button (12)(26), with the "STOP" button (14)(28)
the player goes back to "STOP" mode. This key is located both on the
front panel and on the remote control.
If this button is pressed once while the CD is playing, the current track stops
and the actual track starts playing from the start again. Further presses skip to
playing the previous tracks in their playing sequence. If this button is pressed
(13)(34) in the "STOP" mode, you can choose all the CD tracks in reverse order star-
BACK ting with the last track. Playback can then be started again with the
"PLAY/PAUSE" button (12)(26). With the "STOP" button (14)(28) the player
goes back to "STOP" mode. This button is located both on the front of the
device and on the remote control.
Vincent
37