Operation With A Dcc Command Station ( Multimaus ® ); More Functions - Roco BR 03.10 DR Manuel

CV Name
17+ Long address (requirement: corresponding CV29 long
18 address setting is activated)
29 Settings
266 Total Volume of all Sounds
▪ Operation with a DCC Command Station (
As the (MULTIMAUS
operated.
Programming modes:
The locomotive and carriages react to all DCC programming modes.
We recommend: direct CV programming (byte by byte) or POM mode (programming on main
track).
The programming is described in the MULTIMAUS
Reading CVs:
With the appropriate equipment (e.g. / Z21 /z21 / z21start), you can read the value byte by byte
and bit by bit.

▪ More Functions

You can find out about a range of other possible set-tings, which are probably very rarely needed,
relating to drive speed curve, load control setting or noise synchronization from the detailed
handbook. This can be downloaded as a pdf document MX645P16 from www.zimo.at.
30
30
8072183920.indd 30
) has 20 function keys and a light button, can be especially comfortably
®
Value
100 – 9999
00 – 255
)
MULTIMAUS
®
manual.
®
Default
Value
14
65
06.09.2017 13:47:57