Regulation The Section Volumes; Organ Style - Viscount Chorale 8 Mode D'emploi

Orgue numérique
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Chorale 8
Owner's Manual
Viscount
4. REGULATING THE SECTION VOLUMES
Pressing the [VOL.] piston on the third manual panel displays the section volumes video page:
Use the [FIELD
] and [FIELD
] buttons to move the cursor to the relevant section and [VALUE +]
and [VALUE -] to adjust the volume as required. To confirm the changes and exit the video page, press
the [EXIT] button.

5. ORGAN STYLE

One important feature of the Chorale 8 series is the availability of four different organ styles, Baroque,
French, English and American which allow you to set the sound configuration perfectly suited to the
literature you intend to perform
Since they have been programmed as appropriate to the different schools of organ building, these styles
cannot be modified by the user. There are 4 additional User styles, which can be modified as required.
Remember that the stop switches on the front panel can contain more than one register each. This is
because when different styles are selected, the registers assigned to the various stops may change. The
names of the registers marked on the stops are the ones which will be recalled by the preset styles;
however, the User styles may recall registers the names of which are not screen-printed on the stops if the
user programmes them to do this.
Each style automatically saves the modifications made to the sound setup using the voice replacement
functions and voice volume adjustments. This means that each style can be modified and customised to
personal taste, making the organ extremely flexible.
When a specific basic setup is required during programming, the instrument also allows a style (which
may be a fixed style) to be copied into another User style using the STYLE COPY function described in
point 9.1.
The video page used to select the organ style required is displayed a few moments after the organ is
switched on. The style can be recalled using the STYLE parameter.
Using the [VALUE +] and [VALUE -] buttons you can select the desired style.
54

Publicité

Table des Matières
loading

Table des Matières