Setting The Volumes (Volumes Function) - Viscount UNICO 500 Guide De L'utilisateur

User Guide
- [FIELD ] and [FIELD
[FIELD ] positions it in the field above or the previous field, [FIELD ] in the field below or the next
field.
- [VALUE +] and [VALUE -]: buttons which regulate the values of the parameters, whether they are
numerical or alphanumerical. [VALUE +] increases, [VALUE -] decreases.
- [EXIT] and [ENTER]: buttons for accessing and quitting the display screens and menus, or for
confirming or cancelling prompts made by the system. [ENTER] accesses menus/screens and confirms,
[EXIT] quits menus/screens and cancels.
Pressing the [VOLUMES] button displays the screen relating to all the organ's volume controls:
o MST (Master): the organ's overall volume, which can also be adjusted with the [MASTER VOLUME]
trimmer underneath the manuals.
o REV (Reverb): reverb effect, which can also be adjusted with the [REVERB VOLUME] trimmer
underneath the manuals.
o PHO (Phones): level of the output signal at the headphone [PHONES] connector underneath the manuals.
o EXT (External outputs): general volume of the PROG. OUT connectors on the rear panel.
o PED (Pedal): pedal board divisional volume.
o II (Manual II): second manual divisional volume.
o III (Manual III): third manual divisional volume.
o I (Manual I): first manual divisional volume.
o ORC (Orchestra): volume of the orchestra section.
Press [EXIT] or wait about 4 seconds to quit the screen and return to display of the previous video page.
]: buttons used to move the cursor, identified by the field in reverse.
5. SETTING THE VOLUMES
(VOLUMES function)
Unico 500 and 400
Unico 300
49
Viscount
UNICO 500 - 400 - 300