Replacing The Combined Controller/Limiter; Specification; Dimensions And Connections - Stiebel Eltron PSH 20 Plus Installation Et Fonctionnement

INSTALLATION

Specification

15.6 Replacing the combined controller/limiter

1
1 Controller sensor
2 Limiter sensor
f Insert the controller sensor and the limiter sensor into the f
sensor well as far as they will go.
16. Specification

16.1 Dimensions and connections

www.stiebel-eltron-usa.com
100
c06 c01
a40
2
100
c06 c01
a40
i13
b01
a10 Appliance Height
a30 Appliance Depth
a40 Appliance Diameter
b01 Electrical cable Threaded fitting PG 16
entry Height
c01 Cold water inlet Male thread
Rear clearance
c06 DHW outlet Male thread
Rear clearance
i13 Mounting bracket Height
Wall mounting bracket
i13
b01
a30
PSH 20 Plus PSH 30 Plus
36¼˝ (922 mm) 48⅜˝ (1229mm)
20½˝ (520 mm) 20½˝ (520 mm)
20˝ (510 mm) 20˝ (510 mm)
PG 16
2⅜˝ (61 mm) 2⅜˝ (61 mm)
¾˝ NPT male ¾˝ NPT male
3¾˝ (95 mm) 3¾˝ (95 mm)
¾˝ NPT male ¾˝ NPT male
a30
3¾˝ (95 mm) 3¾˝ (95 mm)
20½˝ (521 mm) 32½˝ (826 mm)
7¼˝ (265 mm)
11¾˝ (300 mm)
13¾˝ (350 mm)
14˝ (360 mm)
16¼˝ (415 mm)
17¾˝ (450 mm)
PSH Plus | 11