Publicité
Les langues disponibles
Les langues disponibles
Fitting the brush/pad driver
• Press the main switch (fig. 10, ref. 1) to turn on the machine.
• Press the brush control button (fig. 11, ref. 1).
• Rest the brush on the floor in front of the machine.
• Pull back on the handle to elevate the front part of the machine, position the brush cowling directly over the brush, and
proceed to lower the machine (fig. 12).
• Jog the brush control lever (fig. 11, ref. 2) repeatedly; this will enable the brush to engage automatically with the hub of
the flange. If the operation is not successful, reposition the machine as before, then repeat the steps of aligning the brush
and jogging the control lever.
Brush/pad driver release
• Press the main switch (fig. 10, ref. 1) to turn on the machine.
• Pull back on the handle to elevate the front part of the machine (fig. 12).
• Press the brush control button (fig. 11, ref. 1) and hold for 3 seconds; the machine will activate the brush release
mechanism automatically.
Batteries: preparation
! DANGER: During battery installation and any type of battery maintenance, the operator must be provided with the necessary personal
protection devices (gloves, goggles overalls, etc.) to limit the risk of injury. Keep clear of naked flames, avoid short circuiting the battery
poles, avoid sparks and do not smoke.
Should it become necessary to replace the battery, contact a specialist technician approved by Dustbane or take the machine to
any Dustbane service centreThe battery is a sealed unit and guaranteed safe under normal circumstances; in the unlikely event of
fluid leaking from the battery, do not touch the fluid and be sure to take the following precautions:
• Contact with the skin can cause irritation; wash with soap and water.
• Inhalation of vapours can cause irritation to the airways; stay out in the open air and consult a doctor.
• Contact with the eyes can cause irritation; flood the eyes with water immediately and thoroughly for at least 15 minutes,
and consult a doctor.
Operations Manual
Micro-5
9
Publicité
