MOVEMENT AND INSTALLATION
Selection of parking position
! WARNING: Before placing the machine in the parking position, empty the detergent tank and the dirty water tank, referring to the
relative sections "Emptying the water/detergent tank" and "Emptying the dirty water tank".
! WARNING: The machine must always be parked standing on end (vertical); if left in the normal operating position (horizontal), the
weight of the machine can cause the bristles of the brush, and the squeegee blades, to bend out of shape.
• Turn off the machine off at the main switch (fig. 3, ref. 1).
• Raise the squeegee by operating the lever (fig. 3, ref. 2).
• Fold the handle fully forward toward the head assembly, referring to the section "Adjusting the handle rake angle"
• Pull the machine up into the vertical position (fig. 4).
• Wipe dry the front squeegee, rear squeegee and brush with a cloth.
Lifting and transporting the packaged machine
! DANGER: Risk of injury if handle is not properly locked in position.
! WARNING: Empty the detergent tank and the dirty water tank, referring to the relative sections "Emptying the water/detergent tank"
and "Emptying the dirty water tank".
• Turn off the machine off at the main switch (fig. 6, ref. 1).
• Raise the squeegee by operating the lever (fig. 5, ref. 1).
• Fold the handle fully forward toward the head assembly.
• Lift the machine by the grip on the shaft of the handle (fig. 6, ref. 2).
Operations Manual
Micro-5
7