Maintenance; Cleaning; Preventative Maintenance Schedule; Calibration Requirements - Triton 4739 Mode D'emploi

MAINTENANCE

CLEANING

NOTE: Before cleaning, disconnect the unit from the power source.
Periodically, clean the system with a clean, lint free cloth moistened with
water and mild antibacterial soap. If a more sterile cleaning is needed,
use a cloth moistened with an antimicrobial cleaner.
Do not submerse the system in water. Should the unit accidentally
become submersed, contact the dealer or Chattanooga Group Service
Department immediately. Do not allow cleaning solutions or water
to enter the ventilation holes in the unit. This could permanently
damage the unit. Do not attempt to use a unit that has been wet inside
until inspected and tested by a Field Service Technicians certified by
Chattanooga Group.
Touch Screen Cleaning
Clean unit display lens using a soft damp cloth, moistened with warm
water and soap if necessary. DO NOT USE alcohol or chlorine based
solvents as this may damage the display.
PREVENTIVE MAINTENANCE SCHEDULE
The design of this device is mechanical in nature and thereby has
moving parts that may become worn or require lubrication from time
to time. It is recommended that this device be placed on a periodic
maintenance schedule to examine for lubrication needs or replacement
of components. Please reference the Service Manual for particular parts
and maintenance. The schedule of the maintenance depends upon the
frequency and duration of device usage and should be determined by
the user.

CALIBRATION REQUIREMENTS

Annual factory calibration is required for Triton traction units. The unit
should be sent to the factory or a Field Service Technician certified by
Chattanooga Group for this procedure.
The Triton Traction unit purchased by your facility is calibrated during the
manufacturing process. The devices are ready to be placed into service
upon delivery.
58
Triton® Traction