Triton 4739 Mode D'emploi page 23

SPECIFICATIONS
ELECTROMAGNETIC COMPATIBILITY TABLES CONTINUED
Recommended separation distances between protable and mobile RF communications equipment and the Triton traction unit.
The Triton traction unit is intended for use in an electromagnetic enviroment in which radiated RF disturbances are controlled. The customer or the user of the Triton
traction unit can help prevent electromagnetic interference by maintaining a minimum distance between portable and mobile RF communications equipment
(transmitters) and the Triton traction unit as recommended below, according to the maximum output power of the communications equipment.
Rated maximum output power of
transmitter
W
0,01
0,1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended separation distance d in metres (m) can be estimated using the equation
applicable to the frequency of the transmitter, where P is the maximum output power rating of the transmitter in watts (W) according to the transmitter manufacturer.
NOTE 1: At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2: These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from structures, objects, and people.
Separation distance according to frequency of transmitter
150 kHz to 80 MHz
d = [3.5]√P
V 1
0,12
0,38
1,2
3,8
12
20
m
80 MHz to 800 MHz
d = [3.5]√P
E 1
0,12
0,38
1,2
3,8
12
Triton® Traction
800 MHz to 800 MHz
d = [7]√P
E 1
0,23
0,73
2,3
7,3
23