Smart Home Ready - Muller licht Tint 404043 Mode D'emploi

Resetting the remote control will delete all pre-defined group settings
and you will have to connect the tint remote control and the tint pro-
ducts again afterwards.
1. Remove the battery compartment cover.
2. Use a pointed object or the battery compartment cover to press the reset
button on the back of the remote control.
3. Then, proceed as described in the section "Resetting the tint product" and
then as described in the section "Adding a new tint product". Each tint
product will then have to be connected individually one after the other. If,
for example, three bulbs belong to one group, you must repeat the steps in
"Adding a new tint product" 3 times.

Smart Home Ready

The tint products from MÜLLER-LICHT can be controlled using the latest Zig-
bee radio standard 3.0 and are compatible with a range of light
control systems, such as Philips Hue* (without Hue Entertainment and
without HomeKit integration), Samsung SmartThings, Amazon's voice
assistant (using Amazon Echo Plus or other Echo devices with integrated
Zigbee Smart Home Hub)** and many more. More information about the
Zigbee Alliance can be found at www.zigbee.org.
For integration in a Smart Home gateway/app, the LED panel
must be reset, see „Resetting the tint product". This initially
clears the connection to the tint remote control.
* Restrictions on individual services possible, updated information
on www.mueller-licht.de/tint/kompatibilitaet
** If this service is available in your country.
tint LED-PANEL
69 INSTRUCTION MANUAL