Set Brightness; Scenes - Muller licht Tint 404043 Mode D'emploi

Set white tone
tings: warm white, neutral white and cold white.
Long-press to set the desired white tone from a continuous scale that reaches the
super-warm white range.

Set brightness

Long-press to set the desired brightness on a continuous scale.

Scenes

'Scenes' are pre-defined light settings.
Activate a scene by short-pressing the corresponding button on the remote control.
"Working light" scene: 100% neutral, bright light
"Sunset" scene: Starts at warm-white light (50%) and then dims further after
15 minutes. After another 10 minutes, the light switches off.
"Party" scene: Starts a bright and constantly changing sequence of colors.
"Night light" scene: Warm-white light dimmed to 5%.
"Campfire" scene: Simulates a campfire in warm color tones, changing
between orange, red and white.
"Romantic" scene: A constant cycle between the colors red, pink
and purple.
If you are using a „tint white" product that only emits white light, the colored
light features will not be available. The tint product
will be switched off.
tint LED-PANEL
63 INSTRUCTION MANUAL
Short-press to select permanently stored white tone set-
Short-press to select permanently stored brightness levels:
100%, 80%, 50%, 20%, 10% and 5%.