Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

EN
54
Environmental note: Before discarding an old appliance, switch off and disconnect it
from the power supply. Cut off and render any plug useless. Cut the cable off directly
behind the appliance to prevent misuse. This should be undertaken by a competent
person.

TROUBLESHOOTING

The oven may have some abnormal breakdown during working. You can check the
fault list before calling costumer service, maybe it is some breakdown you can repair by
yourself.
Normal operation:
• When first using the oven, it may have some situation of peculiar smell and smoking
for some hours. Start the heating function by turning the temperature switch to heat
the oven for 1 hour without contents. When you use the oven for the first time, then
close the heating function, wait for some time until the oven is cold, open the door
and clean the oven.
• Cracking sounds can occur during the operation of the oven because of well of
metal.
• If the heating foods have some moisture, the heating emission hole may blow steam
during the working operation.
• The fan switches on 15 minutes after the oven begins to work. Even if the oven is
closed, the fan will continue to operate for 35 minutes.
• Please preheat the oven before baking.
• For long cooking you can switch off the oven before the end of baking and use the
residual heat for cooking.
Problem
The oven isn't working.
The lamp isn't coming on.
Possible cause
The power supply is
interrupted.
There is a malfunction of
the breakers.
You forgot to push the
timer function key.
The lamp is defective.
There is no electrical
current.
Possible solution
Check your kitchen lamp
or other equipment if it is
still working.
Check if your breaker is
working on.
Reset the timer function.
Replace the lamp (bulb).
Check if the oven has
electrical current.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

10033187

Table des Matières