Pfannenberg PA 10 Notice D'utilisation Et De Montage page 11

Option –SSM (Soft-Start-Module) (24V DC only):
- Limitation of start-up peak:
PA 10-SSM:
PA 20-SSM:
PA X 10-xx-SSM:
PA X 20-xx-SSM:
- Switching through the operating voltage to equipment: above 7V
- Resistor for line monitoring
Operating voltage range: 18V – 30V DC
Connection of a resistor for line monitoring:
Maintenance, Service and Ordering Spare Parts
The device does not require any special maintenance.
External cleaning should be done with a mild soap solution without the use of solvents.
The device may only be operated in the undamaged state within the specified rating.
Conversions, alterations, improper and inadmissible use as well as the non-observance of the notes in these operat-
ing instructions shall render the warranty null and void.
Components may be replaced only by original spare parts.
As a matter of principle, repairs are to be carried out in the manufacturing works.
085 501 946s
:: max. 2,1 A
:: max. 4,5 A
:: max. 2,1 A
:: max. 4,5 A
mounted
: max. 4,5 A
: max. 4,5 A
Resistors for line monitoring (1KOhm) at
terminal for operating voltage
Position of the resistor with parallel connection of multiple
sounders in the last unit.
Remove unneeded resistors
* *
only in case of separate operation of beacon and sounder
30305-004s 11