Operating Instructions; Symbols; Definition Of Term - Burkert 8685 Manuel D'utilisation

Type 8685 / 8686
Operatinginstructions
1 OperaTing insTrucTiOns
The operating instructions describe the entire life cycle of the device.
Keep these instructions in a location which is easily accessible to
every user and make these instructions available to every new owner
of the device.
the operating instructions contain important safety
information.
Failure to observe these instructions may result in hazardous
situations.
▶ The operating instructions must be read and understood.
1.1

symbols

Danger!
warns of an immediate danger.
▶ Failure to observe the warning will result in a fatal or serious
injury.
Warning!
warns of a potentially dangerous situation.
▶ Failure to observe the warning may result in serious injuries or
death.
Caution!
warns of a possible danger.
▶ Failure to observe this warning may result in a moderate or
minor injury.
note!
warns of damage to property.
▶ Failure to observe the warning may result in damage to the
device or the equipment.
Indicates important additional information, tips and
recommendations.
Refers to information in these operating instructions or in
other documentation.
▶ Indicates an instruction to prevent risks.
→
Designates a procedure which you must carry out.
1.2 Definition of term
The term "device" used in these instructions always stands for the
feedback head Type 8685 and control head Type 8686.
English
5