Mounting The Light; Pipe Mounting The Light; Figure 1 Mounting Options - Federal Signal Commander 371-120 Manuel D'installation Et D'entretien

Installation and Maintenance Instructions

Mounting the Light

The Model 371/371L light is designed for mounting on a flat
horizontal surface or on a 1" NPT pipe. For surface mounting
on solid substrates, the separately purchased Model 371BRCKT
surface mounting bracket can be used. If conduit side-entries are to
be used, disassemble the light as described in "Wiring the Light"
on page 10 and remove one or more knockouts with a blunt tool
before mounting the light. Use a file to remove excess flash around
the knockout.
PIPE MOUNT
1" NPT
PIPE

Pipe Mounting the Light

Attach the light to the 1-inch NPT pipe by threading the light
clockwise on the pipe (Figure 1). For information on making
the electrical connections, see "Wiring the Light" on page 10.
8

Figure 1 Mounting options

371 LIGHT
ASSEMBLY
GASKET
DRILL THREE 9/32"
(7.143 mm) HOLES
MOUNTING
SURFACE
1/4" FLATWASHERS
1/4" SCREWS
Models 371-120 and 371L-120
SURFACE MOUNT
290A7364