Mounting The Light; Table 2 Dimensions; Table 3 Hazardous Location Rating - Federal Signal Commander 371LEDX-120 Manuel D'installation Et D'entretien

Installation and Maintenance Instructions
Hazardous Locations
Class I, Div 2, Groups A, B, C, and D
Class II, Div 2, Groups F and G
Class III

Mounting the Light

EXPLOSION HAZARD — To reduce the risk of fire or explosion,
do not install the beacon in a hazardous location if the operating
temperature of the beacon exceeds the ignition temperature
of the hazardous atmosphere. Before proceeding, consult the
product nameplate and determine the operating temperature of
the beacon.
The Model 371LEDX-120 light is designed for mounting on a flat
horizontal surface or on a 1-inch NPT pipe. For surface mounting
on solid substrates, the separately purchased Model 371BRCKT
surface mounting bracket can be used. If conduit side-entries are to
be used, disassemble the light as described in "Wiring the Light"
on page 12 and remove one or more knockouts with a blunt tool
before mounting the light. Use a file to remove excess flash around
the knockout.
8
Table 2 Dimensions
Height:
Diameter:
Net Weight:
Shipping Weight:

Table 3 Hazardous location rating

Model 371LEDX-120 Rotating Light
11.38 in (288.9 mm)
9.12 in (231.6 mm)
7.1 lb (3.2 kg)
8.1 lb (3.7 kg)
Temperature
Code @ 40 ºC
100 ºC / T5
85 ºC /T6
85 ºC /T6