SMA RoofCommKit-P2-US Instructions D'installation page 16

4 Mounting
• Tighten the screw using a cross-head
screwdriver (size 2).
2. When mounting on the frame construction, put the
bracket of the Gateway on two screws that are
anchored on the frame construction and attach the
Gateway with suitable washers and nuts (hole
diameter in the bracket of the Gateway: 9 mm
(0.35 in)). The cable glands at the Gateway must
face downwards. This will ensure that no moisture
can penetrate the Gateway.
3. Ensure that the Gateway is securely in place.
4. Install additional Gateways if required. Note that a maximum of three Gateways can be
connected to one module.
16 RoofCommKit-P2-US-IA-xx-10
SMA Solar Technology America LLC
Installation manual