Service Mode Menu - VATECH EzRay Air Portable Manuel D'utilisation

5. Service Mode
5.3

Service Mode Menu

Perform the Service Modes described in this section referring to '5.2 Changing System
Parameters'.
5.3.1 Factory Default Settings
Perform this mode to restore the system to the factory default settings (it initializes all
the parameters except for n.24).
Service Mode No.
n.01
To restore the system to the factory default settings,
1. Select n.01 by pressing the jog dial, then "YES" is displayed on the Control
Panel. It restores the system to the factory default.
2. Save the setting, and check if the system is restored to the factory default.
44
Item
Factory default settings
EzRay Air Portable (Model: VEX-P300) User Manual