10. Appendix; 10.1 Combining The Holder And The Devices Using A Tripod - VATECH EzRay Air Portable Manuel D'utilisation

10. Appendix

10.1 Combining the Holder and the devices using a tripod

1. Using a Phillips screwdriver, connect the EzRay Air Portable and Gender cable
with the supplied screws.
2. Attach the holder to a tripod. Refer to the Tripod manual for how to attach to a
tripod.
EzRay Air Portable (Model: VEX-P300) User Manual
Portable x-rays are not available in some countries. To be
used in these countries, Vatech provides the holder with the
exposure switch as an option.
The cradle is packed/shipped in a separate box as shown in
the image below.
Remove all the components in the box and follow the
procedure below to attach the cradle. (Note: Tripod not
included)
To remove the holder, reverse the mounting procedure.
10. Appendix
69