VATECH EzRay Air Portable Manuel D'utilisation page 91

Guidance and manufacturer's declaration - electromagnetic immunity
The VEX-P300 is intended for use in the electromagnetic environment
specified below. The customer or the user of the VEX-P300 should assure
that it is used in such an environment.
Test of
Electronic
Interference
Resistance
Electrostatic
discharge
(ESD)
IEC 61000-
4-2
Radiated RF
Electromagn
etic Field
IEC 61000-
4-3
Immunity to
Proximity
Fields from
RF wireless
Communicati
ons
Equipment
according to
Table 9 in
IEC 60601-
1-2
Electrical
fast
transient/bur
st IEC
61000-4-4
Surge
IEC 61000-
4-5
EzRay Air Portable (Model: VEX-P300) User Manual
IEC 60601-1-2 Compliance
test level level
Discharge by ±8 Discharge by ±8
kV direct contact kV direct contact
±15 kV of Air-gap ±15 kV of Air-
discharge gap discharge
3 V/m 3 V/m
80 MHz-2.7 GHz 80 MHz-2.7 GHz
80% AM at 1 kHz
80% AM at 1
kHz
28 V/m Max. 28 V/m Max.
385-5785 MHz in 385-5785 MHz
according to table in according to
9 table 9
± 2 kV for power ± 2 kV for power
supply lines supply lines
± 1 kV for input/ ± 1 kV for input/
output lines output lines
100 kHz repetition 100 kHz
frequency repetition
frequency
± 1 kV line(s) to ± 1 kV line(s) to
line(s) line(s)
± 2 kV line(s) to ± 2 kV line(s) to
earth earth
10. Appendix
Electromagnetic
environment –
guidance
Floors should be wood,
concrete or ceramic tile.
If floors are covered with
synthetic material, the
relative humidity should
be at least 30 %.
The VEX-P300 is suitable
to use in a professional
healthcare environment.
RF communication
equipment is used on
closer than 30 cm to any
part of the VEX-P300,
including cables specified
by VATECH
The quality of supplied
power should be suitable
for the general business
site or hospital
environment.
The quality of supplied
power should be suitable
for the general business
site or hospital
environment.
85