Table des Matières
Publicité
Sleep Mode 2
If the system (not in use) has been turned on for 5 minutes since the Sleep Mode 1
was started, the Sleep Mode 2 is started. (To see how to change the default waiting
time for the Sleep Mode 2, see 'Waiting Time Setting for the Sleep Mode 2'.)
1.
When the Sleep Mode 2 is started, All displays are turned off on the Control Panel
as shown in the following figure (right).
Brightness: Lightly dark
2.
To return to normal operation, move the system or press any button (except for
the X-ray Exposure Button).
EzRay Air Portable (Model: VEX-P300) User Manual
If the battery charger is connected, Sleep Mode 1 is
maintained.
When not using the system, turn off the system to reduce
battery consumption.
4. Operation
Brightness: Dark
39
Publicité
Chapitres
Table des Matières
