2. Safety Instructions
2.2
Warnings and Safety Instructions
8
This X-ray unit may be dangerous to patient and operator
unless safe exposure factors, operating instructions, and
maintenance schedules are observed.
It is essential to read this user manual carefully and strictly
abide by all warnings and cautions stated within it.
To avoid the risk of electric shock, this device must only be
connected to the supply main with protective earth.
Since rules and regulations concerning radiation safety
differ between countries, it is the responsibility of the owner
and operator of this device to comply with all applicable
rules and regulations concerning radiation safety and
protection in their area.
DO NOT open or remove the cover panels on this device.
Never expose this device to liquids, mists or sprays.
Exposing this device to liquids may cause an electrical
shock or otherwise damage the system.
DO NOT use spray cleaners on this device, as this could
cause a fire.
Never use this device in an environment that is susceptible
to explosion.
DO NOT place flammable materials near this device.
Never touch the patient while also touching the SIP/SOP
connectors.
Medical electrical device is subject to special EMC preventive
measures. For more details, refer to '10.4 Electromagnetic
Compatibility (EMC) Information'.
Patients and operators are encouraged to wear leaded
protective lead-lined aprons unless other Radiation
Protection Protocols are applied locally.
Children and pregnant women must consult with a doctor
before X-ray exposure.
Never try to modify this device, including the wires or
cables. Modifying this device may damage it beyond repair.
Serious dangers may occur from electromagnetic
interference (i.e., noise) between other devices in the area
during specific examinations or medical treatment.
Battery chargers must be in an accessible area where they
can be easily unplugged from the power source.
EzRay Air Portable (Model: VEX-P300) User Manual