Table des Matières
Publicité
4.
After entering the password is completed, the Service Mode is started as shown
in the following figure.
5.
There are a total of 10 modes. To select the first mode, press the AUTO button as
shown on the left, then the Service Mode number n.01 is displayed on the Control
Panel as shown on the right.
6.
Turn the jog dial to select the Service Mode number that has information to
change. To see the functions of each Service Mode menu, refer to '5.3 Service
Mode Menu'.
7.
To save the changes, press and hold the jog dial for about 3 seconds.
8.
After saving the changes, press and hold the SET button and jog dial at the
same time (for about 3 seconds) to return to radiography.
EzRay Air Portable (Model: VEX-P300) User Manual
5. Service Mode
43
Publicité
Chapitres
Table des Matières
