7.
Cleaning and Maintenance
7.1
Cleaning
The device surfaces can be cleaned with a soft cloth damped in an alcohol-based,
non-corrosive cleaning solution. If necessary, wipe off surfaces with disinfectant.
If necessary, wipe off surfaces with disinfectant.
Please observe the hygiene instructions of the phosphor plate scanner
manufacturer.
EzRay Air Portable (Model: VEX-P300) User Manual
Before cleaning the device, make sure to turn off the device.
When cleaning the surfaces, make sure that the device is not
connected to the battery charger.
DO NOT expose the device to any liquids.
DO NOT use spray cleaner or disinfectant directly into the
device as this could cause a fire.
The soft cloth should be damp, but not dripping wet.
The cloths or wipes cannot be re-used.
7. Cleaning and Maintenance
57