Publicité
Les langues disponibles
Les langues disponibles
REMOTE CONTROL OPERATION
Read and familiarize yourself with the complete
operation of the remote control before attempting
to start the outboard.
IMPORTANT: The operation of this remote con-
trol may vary from one outboard model to anoth-
er. Refer to outboard's operator's guide for
specific instructions related to outboard.
Emergency Stop Feature of Key Switch
Push clip of emergency stop lanyard onto key
switch as shown.
1
1. Emergency stop clip
Lanyard MUST be securely attached to operator.
1
2
1. Key switch
2. Lanyard
A WARNING
Lanyard MUST be securely attached to
operator, and clip MUST be installed on
key switch. DO NOT operate outboard with
clip removed from switch, except in an
emergency.
If operator is thrown from helm, lanyard will pull
clip from key switch to stop outboard.
IMPORTANT: In an emergency, a passenger
can put control handle in NEUTRAL and restart
outboard without lanyard.
4 of 20
Fast Idle
Use of fast idle feature is not required on
Evinrude E-TEC outboards. Refer to operator's
guide for specific outboard.
The fast idle button can be used to advance
throttle without shifting into gear. With control
handle in NEUTRAL, push on fast idle button
(cover) to open throttle for starting and warm-up.
1. Fast idle button (push on cover)
Key Switch
Refer to operator's guide for specific starting
006155
instructions related to outboard.
Turn key switch from OFF to ON position. The
warning horn should sound momentarily to
indicate it is working. Turn key to START
position. Release key as soon as motor starts.
DO NOT turn key to START while outboard is
running.
006153
PRIME feature is NOT used on Evinrude E-TEC
outboards. To use PRIME feature, momentarily
push key IN with key in ON position.
DO NOT run a cold engine any faster than
necessary to keep it from stalling. DO NOT
exceed 2500 RPM in NEUTRAL. If throttle is
advanced for starting, reduce idle speed setting
as soon as outboard starts. For outboards with
Quikstart™, wait until engine slows to IDLE RPM
before shifting into gear.
1
006157
006154
Publicité
