Setting Up The Machine; Electrical Connection - Singer SE300 Manuel D'instructions

ELECTRICAL CONNECTION

DANGER
To reduce the risk of electric shock:
WARNING
1. Place machine on stable surface.
2. Connect the power line cord to the machine by inserting
the 2-hole plug into the power cord connector.
3. Connect the power line plug to the electric outlet.
4. Turn on the power switch.
FOR UNITED STATES AND CANADA USERS:
POLARIZED PLUG INFORMATION
the plug in any way.
S U
ETTING
FOOT CONTROLLER
Use of foot controller will permit control of start, stop and speed
with your foot.
2. Push foot controller plug into the connector on machine.
3. Place foot controller at your feet.
4. Turn on the power switch.
5. A lamp will light up when switch is turned on.
6. The harder you press the foot controller, the faster the
machine will sew. The machine will stop when foot
controller is released.
WARNING
it.
10
M
P THE ACHINE