Singer SE300 Manuel D'instructions page 35

S
EWING
EYELET
This stitch pattern is used for making belt holes and other
similar applications.
31 Eyelet
length.
1. Place the fabric under the presser foot and lower the
Machine will sew the eyelet and stop automatically.
2. Press the Thread Cutter button and raise the presser foot.
3. Make a hole in the center of the eyelet.
NOTE:
Eyelet punch is not provided with this machine.
CONTINUOUS DECORATIVE PATTERN
No. 39-249
To customize the continuous decorative stitch pattern, you may
adjust the length and width of pattern. Experiment with fabric
scraps until you achieve the desired length and width.
S L
EWING IGHTWEIGHT
When sewing lightweight fabrics, it is suggested that you use
stabilizer on the backside of the fabric. This can help prevent
stitches from puckering the fabric.
35
F
ABRICS