Singer SE300 Manuel D'instructions page 32

BUTTONHOLE SEWING
This machine can sew 13 types of buttonholes.
20. Keyhole Buttonhole
21. Keyhole Buttonhole with cross bar
22. Tapered Keyhole Buttonhole
25. Round Ended Buttonhole with cross bar
27. Decorative Buttonhole
29. Heirloom Buttonhole
30. Bound Buttonhole
NOTE:
Density of the sides of the buttonhole may be adjusted with
stitch length control.
1. Mark position and length of buttonhole on fabric.
slide on the base to the diameter of the button, plus the
thickness of the button.
S
EWING
bring upper thread to the left.
4. Position fabric under presser foot so that the center line
Lower the foot while pulling the frame of the Buttonhole
NOTE:
When sewing stretch fabrics, it is suggested that you use
interfacing on the backside of the fabric.
5. Lower the Buttonhole Lever completely.
NOTE:
Machine will not start to sew if Buttonhole Lever is not
positioned all the way forward.
6. Hold upper thread lightly and start the machine.
7. Machine will sew the buttonhole in the order as shown and
stop automatically after sewing.
1
1
1
32
2 3 4 5 6
2 3 4
2 3 4 5