Wolf 30 62 543 Mode D'emploi Et Instructions De Montage page 5

Remote contact
Description of function:
remote contact
General view of controls
Program
selection
Temperature
selection
Example No. 1:
Example No. 2:
30 62 425_0309
Installation/Operation
Analog Remote Control for WRS
- Switch off the main switch
- Wire the remote contact with 2-core cable (min. cross-section
0.5mm²) as illustrated in the sketch.
The heating system can be switched to 24-hour operation directly,
by means of a floating contact.
While the remote contact remains open, the controller operates
in the preset mode.
Snap the RC onto the backing plate. When locating the RC on
the backing plate, make sure that the contact pins of the RC are
not bent.
Left knob
Temperature
Five different heating programs can be selected by turning the
knob on the right. The individual programs are:
In Automatic mode the heating system functions in accordance
with the timer program (1, 2 or 3) selected on the programming
unit (BM)
Heating over 24 hours.
Storage tanks are heated in accordance with the timer pro-
gram.
Economy mode over 24 hours.
Storage tanks are heated over 24 hours.
Summer mode (heating off), storage tanks are heated in ac-
cordance with the timer program, frost protection for heating
system is ensured.
Burner and heating circulation pump(s) off, storge-tank heating
off, frost protection ensured (see installation/operating instruc-
tions for controller).
The knob on the left is used to vary the current room tempera-
ture +/- 4°C from the standard 0 setting. The correction applies
to the daytime setting (heating mode) and the nighttime setting
(economy mode).
Room-temperature setting at controller in heating mode: 21°C
Room-temperature setting at controller in economy mode: 18°C
Temperature-selector knob: in position 0
Room temperature in heating mode: approx. 21°C
Room temperature in economy mode: approx. 18°C
Room-temperature setting at controller in heating mode: 21°C
Room-temperature setting at controller in economy mode: 18°C
Temperature-selector knob: turned to position 2
Room temperature in heating mode: approx. 23°C
Room temperature in economy mode: approx. 20°C
Right knob
Program
5