Switching On Mode; Settings For All Channels - Medion MD 30262 Mode D'emploi

S O
WITCHING N
You can establish your preferred Operating Mode of the TV after switching it on with this
setting.
1. Press the MENU button to reach the Main Menu.
2. Select the INSTALLATION Menu Point with the
button again.
3. Move the selection bars to the SWITCH ON WITH Menu point with the
tons.
You will now be able to choose between the VGA/CHANNEL 1/LAST CHANNEL
/AV/INSTALLATION types of operation by means of the
pressing the MENU-button (selection list).
VGA: Switching on in the VGA PC Mode
CHANNEL 1: Switching on with channel position 1
LAST CHANNEL: Switching on with the last channel viewed
AV: Switching on with the last mode used for external devices
INSTALLATION: Switch on as at the status of the initial installation – see chapter „6.
APSAS First Time Installation"on page 11.
S
ETTINGS FOR ALL CHANNELS
1. Press the MENU button to reach the Main Menu.
2. Select the INSTALLATION Menu Point with the
button again.
3. Select the SETTING ALL CHANNELS Menu Point with the
the MENU button again.
4. Sharpness Setting:
This function sets the sharpness setting for all channels. You can choose between set-
tings 0-3 through a Menu by pressing the MENU button. There is a more detailed de-
scription of this function in chapter „Additional picture settings" on page 16.
5. Noise Reduction Setting:
This function sets the noise reduction setting for all channels. You can choose between
the AUTOMATIC/ OFF/ WEAK/ MEDIUM/ LOUD settings through a Menu by pressing the
MENU button.
You will find a more detailed description of the settings in chapter „Additional picture set-
tings" on page 16.
Decoder Setting:
6.
This function sets the decoder function for all channels. You can choose between the
OFF/ EXTERNAL/ INTERNAL SOUND/ EXTERNAL SOUND/ INTERNAL SOUND settings
through a Menu by pressing the MENU button.
You will find a more detailed description of the settings in chapter „Setting channels
manually" on page 21.
34
M
ODE
Settings of all programs
1. Sharpness setting
2. Noise reduction setting
3. Decoder setting
P+/P- buttons and press the MENU
P+/P- buttons and press the MENU
E E
N N G G L L I I S S H H
P+/P- but-
VOL+/VOL- buttons or by
P+/P- buttons and press