Sleep Timer - Medion MD 30262 Mode D'emploi

1. Press the MENU button. The Main Menu will be displayed.
2. Move the Selection Bar to the CHILD LOCK Menu Point with the
press the MENU button to call up the sub-menu.
3. Press the MENU button and then enter a single digit number = your PIN number. The
CHILD LOCK Point cannot be selected as long as no PIN number has been entered; the
Point cannot be selected and is represented as grey.
The CHILD LOCK can be switched on under the relevant Menu Point after entering your
4.
PIN number. You will have to call up the CHILD LOCK Menu again and set the CHILD
LOCK to OFF after entering your PIN number, in order to switch off the Child Lock again
later.
S T
LEEP IMER
The Sleep Timer switches the device into the Readiness Mode automatically according to the
period of time selected by you.
Variation 1: Press the SLEEP button to reach the Sleep Timer Menu directly.
Variation 2: Press the MENU button to call up the Main Menu, position the Selection Bar on
Sleep Timer by means of the
by means of the MENU button.
You can set the switching off time in steps of 5 MIN./10 MIN./15 MIN./30 MIN./1 HOUR/2
HOURS/OFF by operating the SLEEP button or the
Menu by pressing the MENU button. The OFF setting means that the Sleep Timer is
switched off.
You can check how many minutes still remain until switching off at any time in the
CURRENT COUNTER line by calling up the Sleep Timer Menu again.
32
Main Menu
1. Picture
2. Sound
3. Program table
4. Installation
5. Child lock
6. Sleeptimer
7. Swap function
8. Games
Child lock
1. PIN xxxx
2. Child lock On/Off
P+/P- buttons and call up the relevant Menu
Sleeptimer
1. Sleeptimer
2. Current counter in minutes:
E E
N N G G L L I I S S H H
P+/P- buttons and
VOL-/VOL+ buttons, or call up this