PR electronics 5715 Mode D'emploi page 18

Basic values
Basic
Input type accuracy
≤ ±4 µA
mA
≤ ±20 µV
Volt
≤ ±0.1 Ω
Potentiometer
≤ ±0.2°C
Pt100
≤ ±0.3°C
Ni100
TC type:
≤ ±1°C
E, J, K, L, N, T, U
TC type: B, R, S,
≤ ±2°C
W3, W5, LR
EMC immunity influence ..................................... < ±0,5% of reading
Auxiliary supply:
2-wire supply ......................................... 25...16 VDC / 0...20 mA
Wire size, pin 41...46 (max.) ........................ 1 x 1.5 mm
Wire size, others (max.) ............................... 1 x 2.5 mm
Screw terminal torque ................................. 0.5 Nm
Relative humidity ......................................... < 95% RH (non cond.)
Dimensions (HxBxD) ................................... 48 x 96 x 120 mm
Cutout dimensions ...................................... 44.5 x 91.5 mm
Tightness (mounted in panel) ...................... IP65
Weight ......................................................... 260 g
RTD and potentiometer input:
Input Min.
type value
Pt100 -200°C
Ni100 -60°C
10 Ω
Potentiometer
Input for RTD types:
Pt10, Pt20, Pt50, Pt100, Pt200, Pt250, Pt300, Pt400, Pt500, Pt1000
Ni50, Ni100, Ni120, Ni1000
Cable resistance per wire, RTD (max.) ........ 50 Ω
Sensor current, RTD .................................... Nom. 0.2 mA
Effect of sensor cable resistance
(3- / 4-wire), RTD ......................................... < 0.002 Ω / Ω
Sensor error detection, RTD ....................... Yes
Short circuit detection, RTD ........................ < 15 Ω
32
Temperature
coefficient
≤ ±0,4 µA / °C
≤ ±2 µV / °C
≤ ±0.01 Ω / °C
≤ ±0.02°C / °C
≤ ±0.03°C / °C
≤ ±0.05°C / °C
≤ ±0.2°C / °C
2
stranded wire
2
stranded wire
Max.
value Standard
+850°C IEC60751
+250°C DIN 43760
100 kΩ -
TC input:
Min.
Type value
B +400°C +1820°C
E -100°C +1000°C
J -100°C +1200°C
K -180°C +1372°C
L -200°C +900°C
N -180°C +1300°C
R -50°C +1760°C
S -50°C +1760°C
T -200°C +400°C
U -200°C +600°C
W3 0°C +2300°C
W5 0°C +2300°C
LR -200°C +800°C
Cold junction compensation (CJC)
via internally mounted sensor ................. < ±1.0 °C
Sensor error detection, all TC types ........... Yes
Sensor error current:
when detecting ....................................... Nom. 2 µA
else .......................................................... 0 µA
Current input:
Measurement range .................................... -1...25 mA
Programmable measurement ranges .......... 0...20 and 4...20 mA
Input resistance ........................................... Nom. 20 Ω + PTC 25 Ω
Sensor error detection:
loop break 4...20 mA ............................. Yes
Voltage input:
Measurement range .................................... -20 mV...12 VDC
Programmable measurement ranges .......... 0...1, 0.2...1,
Input resistance ........................................... Nom. 10 MΩ
Outputs:
Display:
Display readout ........................................... -1999...9999 (4 digits)
Decimal point .............................................. Programmable
Digit height .................................................. 13.8 mm
Display updating ......................................... 2.2 times / s
Input outside input range is
indicated by ................................................. Explanatory text
Max.
value Standard
IEC 60584-1
IEC 60584-1
IEC 60584-1
IEC 60584-1
DIN 43710
IEC 60584-1
IEC 60584-1
IEC 60584-1
IEC 60584-1
DIN 43710
ASTM E988-90
ASTM E988-90
GOST 3044-84
0...10 and 2...10 VDC
33