Torch Dimensions And Weight; Serial Number And Rating Label Location; Selecting A Location - Miller Spectrum 125C Manuel Du Propriétaire

4-4. Torch Dimensions And Weight

4-5. Serial Number And Rating Label Location

The serial number and rating information for this product is located on the back. Use rating label to determine input power requirements and/or rated
output. For future reference, write serial number in space provided on back cover of this manual.

4-6. Selecting A Location

Dimensions And Weight
44 lb (20 kg) − Non-CE Models
52 lb (24 kg) − CE Models
Movement
2
Location And Airflow
.
Serial Number/Rating Label located on
rear panel of plasma cutter; use label to
determine input power for unit.
10 in.
(254 mm)
OM-2248 Page 12
1 in.
(25 mm)
1-3/8 in.
(35 mm)
3.0 lb (1.4 kg)
1
8-3/8 in.
(213 mm)
6-3/4 in.
(171 mm)
17 in.
(432 mm)
18 in.
(457 mm)
3
10 in.
(254 mm)
Ref. 801 397-A
1 Lifting Handle
Use handle to lift unit.
2 Hand Cart
Use cart or similar device to move
unit.
3 120 VAC Receptacle (Non-CE
Models)
4 230 VAC Receptacle
(CE Models)
Locate unit near correct input
power supply.
! Special installation may be
required where gasoline or
volatile liquids are present −
4
see NEC Article 511 or CEC
Section 20.
loc_2 3/96 - Ref. 802 459-B / 802 676-A / 802 460-B