Step 6: Set Up The Acoustimass - Bose CINEMATE 1 SR Guide D'installation

Step 6: Set up the Acoustimass
What you need for this step:
Acoustimass module
CAUTION: Choose a stable and level surface for the Acoustimass module. Vibration can
cause the speaker to move, particularly on smooth surfaces like marble, glass, or highly
polished wood.
A. When placing the Acoustimass
attach the included rubber feet to the bottom of the module for greater stability and
to protect your floor.
B. Plug the small end of the power cord into the connector labeled Power.
Power
C. Make sure the bass control knob is set to the middle of the range.
Rubber feet
® module on bare floors, or other smooth surfaces,
Rubber foot
Bottom of module
For service use only
Power cord
For service use only
Bass control knob
S
YSTEM
®
module
S
ETUP
English – 15