First Time Startup; Step 1: Install The Remote Batteries; Step 2: Run The Adaptiq - Bose CINEMATE 1 SR Guide D'installation

First time startup

Step 1: Install the remote batteries
What you need for this step:
Remote control
A. Slide the battery cover off the back of the remote control.
B. Install the two provided AA (IEC LR6) batteries, matching the plus and minus ends
of the batteries to the polarity markings inside the battery compartment.
C. Slide the battery cover on until it snaps into place.
Step 2: Run the ADAPTiQ
What you need for this step:
Remote control
®
The ADAPTiQ audio calibration system customizes the sound of your system to the
acoustics of your listening area. To perform a calibration you need about 10 minutes
when the room is quiet. While wearing the special headset, the system will ask you to
place yourself in five different locations (sitting or standing) in your listening area as the
system takes measurements in each. Audio prompts from the system will guide you
through the process.
Battery cover
(2) AA (IEC LR6)
batteries
AA (IEC LR6)
batteries (2)
® calibration.
®
ADAPTiQ audio calibration headset
S S
YSTEM ETUP
English – 17