What To Do If Your Pressure Cooker Is Not Working Properly - all-clad NC00134439 Guide D'utilisation

WHAT TO DO IF YOUR PRESSURE COOKER IS NOT
Problems
Unable to open the lid.
WORKING PROPERLY
Possible causes
Unable to open because of pressure
in the inner pot.
Pressure in the pot is fully released
but the float valve is stuck because it
is too dirty, and therefore unable to
move down.
Solutions
Wait for the pressure in the pot to be completely
released automatically.
Press and hold the steam release button.
Note: when you press and hold the steam
release button more than 3 seconds, the valve
remains open during 30 seconds.
Be sure the pressure is totally released by
complete cool down 2 hours minimum (do not
attempt to put the product into water to cool
it down).
Then use a stick to poke the float valve, to make
it fall down. Be careful, keep your face away
from the lid and the handle.
Before using it again, please clean and wipe the
float valve.
EN
31