Remote Control Layout; Remote Control Operation; Temperature Display; Fl Ame Height Time - Napoleon Elevation X Serie Manuel Du Propriétaire

3.0 remote control layout

EN
Transmission
Flame ON
Blower

4.0 remote control operation

4.1 ADD TITLE: HAND HELD REMOTE OPERATION remote control operation
A. Press the on / off key on the transmitter. The transmitter display will
show all active icons on the screen. A single "beep" from the receiver will
confi rm reception of the command.
4.2

temperature display

ADD TITLE: TEMPERATURE DISPLAY
A. With the system in the off position, press the temperature key
and the mode key at the same time to change from degrees ºF to
ºC.
B. Look at the LCD screen on the transmitter to verify that a ºC or ºF
is visible to the right of the room temperature display.
4.3 ADD TITLE: FLAME HEIGHT fl ame height time
The remote control has six (6) fl ame levels. With the system on and the fl ame level at the maximum, press the
down arrow key once and it will reduce the fl ame height by one step until the fl ame is turned off.
The up arrow key will increase the fl ame height each time it is pressed. If the up arrow key is pressed while
the system is on but the fl ame is off, the fl ame will come on at the high position. A single "beep" will confi rm
reception of the command.
8
W415-2001 / 09.27.19
76 76
°F
OFF
Flame Off Flame at level 1
Key Lock
76
°F °F
Flame at level 5 Flame at "Hi" level 6
Low battery alarm
Room
Temperature
CPI mode
AUX Front
Ember Bed
Split Flow
Light
Blue LCD Display
On / Off Key
Temperature Key
Up / Down Arrow Key
Mode Key
°F
73 23
76
°F
Hi
°C