Assembly; Delivery Content - HOLZMANN MASCHINEN TK305 Mode D'emploi

A safety notice designed in this way indicates a potentially hazardous situation which,
if not avoided, may result in property damage.
Irrespective of all safety regulations, their sound common sense and corresponding technical
suitability/training are and remain the most important safety factor in the error-free operation of
the machine. Safe working depends first and foremost on you!
15 TRANSPORT
For proper transport, follow the instructions and information on the transport packaging regarding
centre of gravity, attachment points, weight, means of transport to be used and prescribed
transport position, etc.
Transport the machine in its packaging to the place of installation. When lifting, carrying and
depositing the load, make sure that you are in the correct posture:
 Lifting, Depositing
Ensure stability when lifting / setting down (legs hip width).
Lift / lower load with bent knees and straight back (like weightlifter).
Do not lift / lower the load jerkily.
 Carrying
Carry load with both hands as close to body as possible.
Carry load with straight back.
16

ASSEMBLY

16.1 Delivery content

Please check the product contents immediately after receipt for any eventual transport damage or
missing parts. Claims from transport damage or missing parts must be placed immediately after
initial machine receipt and unpacking before putting the machine into operation. Please
understand that later claims cannot be accepted anymore.
16.2 Assembly
The machine is delivered pre-assembled.
assembled by the customer.
You can place the machine in the desired location either on a workbench or other recommended
leg set. The base of the saw has four holes to mount the table saw. If the saw is to be used in on
location, permanently fasten it to the workbench or leg set using appropriate bolts with lock
washers and nuts.
When permanently mounting the machine we recommend that the four rubber feet located
underneath each of the mounting holes are removed and stored safely for possible future use.
HOLZMANN MASCHINEN GmbH
N O T I C E
For transport reasons, some parts of the machine can be
www.holzmann-maschinen.at
TRANSPORT
33
TK 305